Storcase-technology DS90 Manuel d'utilisateur télécharger pdf (Page 26)

Kingston Technology Company DS90 User's Guide - Rev. C00

20 Appendix B - Accessories and Options

3.5 Inch Drive Adapter Brackets (Optional)

1040400124 A

LEFT FRONT

Data Keeper

Bezel

Adapter Bracket

Face (2ea.)

Adapter

Bracket (2 ea.)

Bracket to Drive

Screw (4 ea.)

0071

Figure B-5: Optional 3.5 Inch Drive Adapter Brackets (P/N DX100-35/KIT)

The Kingston Technology 3.5 inch peripheral adapter brackets are designed to mount 3.5 inch

peripherals with either fixed or removable media into 5.25 inch mounting bays of computer

systems and external chassis. Before installation, make sure to have the appropriate

documentation at hand for reference, such as computer system and drive manufacturer's

manuals.

NOTE: The adapter brackets are not required for 3.5 inch fixed media devices such as

hard drives, which may be bottom mounted to the existing mounting bracket

inside the unit.

Steps for installing a front-loading drive or fixed media devices with an exposed front

bezel:

1. Make sure all system and peripheral power is off and disconnected.

2. Remove the system or peripheral expansion cover and face plate.

3. DO NOT REMOVE THE ADAPTER BRACKET FACE OR RETAINING SCREWS.

These must be left in place on both brackets for installations which expose the drive

bezel.

4. Attach the adapter brackets (DX100-35/KIT) to the drive with the screws provided as

shown in Figure B-5.

5. The face of the adapter bracket should be flush with the face of the drive you are

installing.

6. Tighten the screws.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Storcase-technology DS90 Manuel d'utilisateur Page 26